Tree Removal & Stump Grinding in Burnside

DTS Tree & Stump Removal is a trusted local arborist working across Burnside and surrounding Melbourne suburbs. From single backyard trees to large, dangerous removals — we've got Burnside covered.

Local Arborists Serving Burnside

Burnside sits within Melton City Council — a growth-corridor area mixing newer estates with remnant River Red Gum paddock trees. That shapes the work we do here: river Red Gums on the older paddock boundaries, plus 20–30 year old estate plantings — flowering gums, liquidambars, pin oaks and ornamental pears.

Before we quote a removal in Burnside we check the planning controls on your address, because the Melton Planning Scheme decides whether council approval is needed. A mix of tight estate blocks and semi-rural acreage. We bring narrow-access gear for the estates and tracked machinery, tipper and chipper for the larger properties.

Every job in Burnside is fully insured ($20M public liability), planned with your property in mind, and quoted honestly with no hidden extras. If a tree is storm-damaged, dead or leaning over a house, fence or power line — call us first.

Services available in Burnside

Tree removal permits in BurnsideMelton City Council

Melton regulates removal mainly through planning scheme overlays plus a Local Law covering street and nature-strip trees. Exotic garden trees on an unencumbered lot usually don't need a permit; native vegetation, creek-corridor trees and anything on the nature strip does.

Planning controls for Burnside sit under the Melton Planning Scheme. You can confirm exactly what applies to your address with a free Planning Property Report from the Victorian Government, or we can check it for you when we quote.

Planning overlays you may strike in Burnside

ESOEnvironmental Significance Overlay

Applies along creek corridors, remnant bushland and grassland reserves. Native vegetation removal generally needs approval.

VPOVegetation Protection Overlay

Protects listed canopy trees and indigenous vegetation — a planning permit is normally required to remove or lop a protected tree.

DDODesign and Development Overlay

Mostly affects built form, but estate and infill areas can carry landscaping and canopy-retention conditions.

Overlay coverage varies street by street and is indicative only — always confirm against the current planning scheme for your property before removal.

Our tree removal process in Burnside

  1. 1. Free on-site assessment

    We inspect the tree, the target zone and the access on your Burnside property, and give you a fixed written price.

  2. 2. Planning and overlay check

    We check the Melton Planning Scheme controls for your address and tell you straight away if Melton City Council approval is likely to be needed.

  3. 3. Permit application (if required)

    If a permit is needed we help prepare the application, including an arborist report and photos supporting the removal.

  4. 4. Site setup and safety

    Drop zones, ground protection, traffic management if needed, and notification to neighbours where we're working over a shared boundary.

  5. 5. Removal or dismantle

    A mix of tight estate blocks and semi-rural acreage. We bring narrow-access gear for the estates and tracked machinery, tipper and chipper for the larger properties.

  6. 6. Stump grinding and clean-up

    Stumps ground 200–300mm below grade (deeper for slabs or replanting), all timber chipped and removed, and the site raked clean.

Arborist reports for Melton City Council

If Melton City Council requires a planning permit to remove your tree, they'll almost always want a report from a qualified arborist. We can prepare that report for you — covering species identification, health and structural condition, useful life expectancy, the risk the tree presents, and whether pruning is a reasonable alternative to removal.

We also prepare tree protection and pre-construction reports for Burnside developments, and hazard assessments for insurance claims after storm damage.

Common trees we work on in Burnside

River Red Gums on the older paddock boundaries, plus 20–30 year old estate plantings — flowering gums, liquidambars, pin oaks and ornamental pears.

Why Burnside homeowners choose DTS

  • Fully insured — $20M public liability cover
  • Large tree specialists — gums, pines, cypress and palms
  • Tight-access removals with sectional rigging and narrow-access gear
  • Full clean-up, chipping and green-waste removal
  • Free on-site quotes — no obligation, usually same day
  • Local crew servicing Burnside weekly
  • 24/7 emergency call-outs for storm damage

Tree removal prices in Burnside

Indicative ranges for Burnside jobs with reasonable access and full green-waste removal included. Difficult access, powerlines or crane work push a job toward the top of its range — we give you a fixed price on site.

JobTypical costExample
Small tree (up to 5m)$450 – $900Ornamental pear, fruit tree, small wattle
Medium tree (5–10m)$900 – $2,000Silver birch, melaleuca, established conifer
Large tree (10–20m)$2,000 – $4,500Mature gum, cypress, liquidambar
Very large / crane work (20m+)$4,500 – $10,000+Large eucalypt over a house or pool
Stump grinding$100 – $600Priced by stump diameter, cheaper booked with the removal

Burnside tree removal FAQs

Do I need a permit to remove a tree in Burnside?

It depends on the planning overlays on your title and whether the tree is native or on the nature strip. Melton City Council controls removal through the planning scheme and its local law. We check the controls for your address free of charge when we quote.

How much does tree removal cost in Burnside?

Most Burnside removals fall between $450 and $6,500. Small trees under 5m are typically $450–$900, medium trees $900–$2,000 and large trees over 10m $2,000–$4,500. Access, proximity to buildings and whether a crane is needed are the biggest price drivers.

How quickly can you get to Burnside?

We service Burnside weekly and can usually quote within 24–48 hours. Storm damage and dangerous trees are prioritised, with 24/7 emergency call-outs available.

Do you remove the stump as well in Burnside?

Yes. We grind stumps 200–300mm below grade — deeper if you're laying a slab or replanting — and remove or leave the mulch, whichever you prefer. Booking it with the removal is cheaper than a separate visit.

Are you insured to work in Burnside?

Yes — DTS carries $20 million public liability insurance on every job. Our current Certificate of Currency is available on request or from our insurance page.

Serving Burnside from our Kealba base

Our yard and equipment are based at 16a Driscolls Rd, Kealba VIC 3021, so our crews reach Burnside quickly — including same-day emergency call-outs after storms. Find us on Google Maps.

📞 0468 355 722Get a Quote